Egress Window Basement Size and the Way to Install It

admin
0 0
Read Time:6 Minute, 15 Second

Choosing the right egress window basement size is crucial. It ensures that the window is fit enough if you have to move out of the house in emergencies. The information below will discuss more egress windows. As a result, you get the right product and get benefits from it maximally. 

About Egress Window 

The egress window is a little bit different compared to common windows. You should know about the egress window definition first to differentiate between this product and common windows. Based on the definition, an egress window is an emergency window. 

Due to its function, this window has to be easy to open. It is built below the ground living space. As a result, you can go outside the house immediately if it is impossible to do it from the regular exit. This window is useful during a fire or any condition when doors and normal windows are blocked or damaged. 

In this situation, go to the basement and go out right away from the egress window. You can still use this window even if nothing happens, such as improving air quality, getting natural light, and making your basement more pleasant. 

egress window basement size
egress window basement size (Source Image : Link)

Egress Window Basement Size

After learning about what an egress window is, you should learn about egress window basement size. The standard basement window is 12 to 24 inches tall and 30 to 36 inches long. This size is often used by homes from 1950 and later. 

Remember to check the standard requirements for fire codes in your area. The fire codes determine the minimum heights, widths, and distance of the egress window from the ground. Some people order the smallest egress window due to the design of their house. 

The smallest egress window size is 20 inches in width x 24 inches in height. It is suitable with a 5.7 sq. ft. net clear opening. The sill height above the floor for this egress window model should be 42 inches.

The Way to Measure Egress Window Basement Size  

You may get confused about how to determine the size of your egress window. Don’t worry! We will give you the steps to measure an egress window to get a precise size. First, you have to measure dimension A first. You can do it from the maximum grade level or ground level down to the basement floor level. That’s it! You get the dimension A in an inch. 

Second, use dimension A you get to measure the minimum height of the egress window. You only have to subtract dimension A with 28 inches. So, it will be dimension A (inches) – 28 inches = minimum height (inches). 

Third, determine the minimum width. You can do it by determining the size of the egress window you want to use. One thing is for sure, the inside width should be wider than the egress window. Now, you have the right egress window size for your home. 

The Egress Window Code Requirements

You should also learn about egress window code requirements. The codes are useful to maximize natural light and ventilation after installing the window. The glass area should be at least 8 percent of the total floor area. This code will make a basement get maximum natural light. 

Your basement will be brighter after installing an egress window. For instance, 16 square feet or 48 inches x 48 inches glass area, the service area will be up to 200 square feet. On the other hand, the window’s clear open area should be 4 percent of the total floor area to maximize the ventilation after installing the egress window. Your basement is not only bright but also comfortable with good air quality. 

The Way to Install an Egress Window 

It is okay if you want to install an egress window yourself. The process is fun for those who love DIY projects. Follow the steps here to know how to install an Egress window at home yourself. First, get the dimension of the egress window you want to use and the layout for the hole. 

The standard egress window is 4 feet x 4 feet. Second, create a 12-inch wider and deeper than the window you are about to install. Remember to create 2 feet paths for the edge. Third, cut the wall to connect the window to the hole. Cutting the wall by yourself is dangerous and hard to do. Call an expert to do it safely and fast. 

Fourth, create a frame for the egress window. Fifth, ensure that the frame is fitted with the wall and use Loctite polyurethane concrete sealant to keep the frame stuck to the wall. Apply grade silicone caulk to the joint between the frames. 

Sixth, install a new egress window and seal the window and the frame using insulating spray foam. Seventh, attach the egress well around the hole. Ensure that everything is completed before covering the side of the hole. It is good to add gravel on the surface of the hole inside the egress well. 

That’s it! The project is done. Try to use the window to get used to it. Now, your basement is not only bright and comfortable but also useful in urgent conditions.

The Cost of Installing a New Egress Window in a Basement 

In case you don’t want to install it by yourself, call an expert to handle this project. It is much safer and faster. The cost of installing a new egress window in a basement varies. It depends on the materials, quality, window situation, and even your living area. In general, you should spend around $1.000 to $2.000 to install a new egress window in your basement with the help of a professional.   

Egress Window Complete Kit 

Nowadays, you don’t have to buy the kit one by one. You can just buy a complete egress window kit and begin the project. A complete egress window kit often consists of steel wells, a sliding window, a plastic well cover, and a galvanized steel escape ladder. 

The model of the steel well varies, such as stacked stone, white, stone wall, slate, sandstone, and others. Indeed, the model of the window is also various, including vinyl, single hung in-swing, European tilt and turn, PVC, frame buck, and others. Choose the model you need based on the size and the style you want. Soon, you will have a great egress window in your basement just like you expect. 

Final Verdict 

Having an egress window at home is so important. It saves you and your family from crucial situations where the doors are blocked and damaged. This window also changes your basement from a dark and scary place into a bright and comfortable area. 

Indeed, measuring the egress window basement size is crucial to ensure that it fits and is strong enough, including the egress window height from floor. The idea is to ensure that it becomes easy and quick access to go outside the house in urgent conditions. 

You can do the project yourself but it will be better to call a professional to accomplish the project. A professional team knows things to do to ensure that your egress window is safe and ready to use. It is also because you have to deal with the irrigation of the house. So, improve the function and quality of your basement by installing an egress window.   

Happy
Happy
0 %
Sad
Sad
0 %
Excited
Excited
0 %
Sleepy
Sleepy
0 %
Angry
Angry
0 %
Surprise
Surprise
0 %

Average Rating

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Leave a Reply

Your email address will not be published. Required fields are marked *

Next Post

The Benefits of Renting Portable Kitchens to Start a Culinary Business

Portable kitchens are popular today because they are flexible and affordable. You can use this kitchen for specific events, such as gatherings, dinners, birthday parties, and many more. This product is also easy to move anywhere. Nowadays, you can even rent a portable kitchen trailer to fill your need. It is […]
portable kitchens

Subscribe US Now